Metal super raschig ring is a kind of superior metal randompacking.lt can be made from carbon steel or stainless steel. The stainless steel material is available in many types, such as SS304,SS304L,SS410 and SS316.   Metal super raschig ring is characterized by high mechanica strength,good loading capacity and uniform gas-liquid distribution.lt has better loading capacity than the metal raschicring.Compared with the general random packing, its load capacity is increased by 30%. And its pressure drop is reduced by70%.Metal super raschig ring is suitable for heavy-duty packing.Due to its unique streamlined design, it performs well in avoidincdroplet formation. This type random packing has excellent masstransfer efficiency and low operating costs. lt is widely used inthe petrochemical industry, metallurgical industries, chlor-alkalindustries and chemica industries

Since Metal Mellapak was be developed & accepted by market. Scientists find Metal Corrugated plate packing was not suitable in any medium’ s requirement  (acid). Furthermore, it is very hard to widely used in industry field. After that, Plastic Corrugated plate packing was born. Compared with Metal Corrugated plate packing, it has large flux, low pressure drop,large surface area and so on.  

Igel ball is a common biofilter material, which mainly uses polypropylene as raw material and is processed into a prickly multi needle plastic ball by injection molding process. The small cylindrical body is evenly distributed in the ball, increasing the distribution point of vapor and liquid, so that it can fully disperse vapor and liquid.      

It was invented by Jaeger Tri. Generally speaking, No big surface area is Tri-pack's biggest advantage. The distinctive shaping of ribs, struts and drip rods gives Tri-Packs tower packing media superior wetting characteristics, and the ability to maintain uniform liquid distribution throughout the bed. In the traditional theory of mass transfer, we often think big surface area will increase the mass transfer efficiency. Sometimes, Excess surface area can impede gas/liquid contact and create higher pressure drops,. Finally, it will lead to Packing's channel blocking.Based on this new understanding, Jaeger had invented Tri-pack.  Basically this pack provides maximum surface contract between the gas and the scrubbing liquid by facilitation through continuous formation of droplets by the packed bed. It was recognized best packing in for air stripping,degasifier and scrubber    

The geometric structure will provide a large specific surface area. The capillary function of the screen also increases the wettability of the surface area. When filling, the upper and lower packing trays cross 90°, which has the advantages of high efficiency, reduced pressure and large flow. It is used in vacuum distillation, atmospheric distillation and the absorption process of difficult to separate or heat sensitive substances.  

Honeycomb shape plastic support block is made of synthetic plastic injection molding. The formula can be adjusted according  to different working conditions to achieve the best effect. It completely replaces the light ceramic packing commonly used  before. The honeycomb shape plastic support block developed by us can be used repeatedly, with large specific surface area  and large ventilation capacity, and its effectiveness is twice that of light porcelain. Especially in the process of maintenance, the  light ceramic packig becomes solid waste, which is difficult to deal with. But honeycomb shape plastic support block can be  reused as renewable resources, which is environmental protection and energy saving. Through the long-term test of Coking  Desulfurization Tower. It is proved that honeycomb shape plastic support block has strong anti blocking ability and excellent  separation and purification effect.        

Wire mesh structured packing has a high specific surface area. At the same time, because of the unique capillary effect of the mesh. The packing surface has better wettability. So it has a high separation efficiency. Compared with other types of packing, it has lower pressure drop and less liquid holding, and it is especially suitable for materials hard to separate and heat sensitive systems. The main materials for making wire gauze packing are stainless steel, copper, aluminum, iron, nickel, etc.   

It is formed from corrugated sheets of perforated embossed metal or wire gauze. The result is a very open honeycomb structure with inclined flow channels giving a relatively high surface area but with very low resistance to gas flow. The surface enhancements have been chosen to maximize liquid spreading. These characteristics tend to show significant performance benefits in low pressure and low irrigation rate applications. Metal Structured Packing is manufactured in a wide range of sizes by different crimp altitude. The Packing Surface ranges from 50 m²/m³ (lowest efficiency, highest capacity) to 750 m²/m³ ( highest efficiency, lowest capacity ). 

Aquarium Bio Balls are a type of biological filtration media used in aquariums and fish tanks to support the growth of beneficial bacteria. These bacteria play a crucial role in the nitrogen cycle, helping to break down harmful waste products like ammonia and nitrite into less toxic nitrate. Bio Balls are widely used in wet/dry filters, sump tanks, and canister filters to maintain water quality and ensure a healthy aquatic environment. Below is a detailed explanation of their function, design features, and usage.  

Ceramic surface can generate extremely thin liquid film. Turbulent liquid flow and tortuous vapor flow passages promote mixing of liquid and vapor with low pressure drop. These are reasons that our ceramic structured packings have the same mass transfer efficiency as metal packings. Meanwhile, they are much more resistant to corrosion and high temperature than metal packings.  

Since Metal Mellapak was be developed & accepted by market. Scientists find Metal Corrugated plate packing was not suitable in any medium’ s requirement  (acid). Furthermore, it is very hard to widely used in industry field. After that, Plastic Corrugated plate packing was born. Compared with Metal Corrugated plate packing, it has large flux, low pressure drop,large surface area and so on.  

Bubble cap tray is a flat perforated plate with risers (like pipes) around the perforations, and caps in the form of inverted cups over the risers.The caps are usually equipped with slots or holes through which vapor comes out. The cap is mounted so that there is a space between riser and cap to allow the passage of vapor. Vapor rises through the riser and is directed downward by the cap passing through slots in the cap, and finally bubbling through the liquid on the tray. As vapor has to pass through many passages this lead to higher pressure drop and lower capacity than other conventional trays. Liquid and froth are filled on the tray to a depth at least equal to the weir height or riser height, giving the bubble-cap tray a unique ability to be used for reaction applications.